전체상품목록 바로가기

본문 바로가기


현재 위치
  1. 제트엔진

JRX 100P 소형제트엔진 가스터빈엔진 항공기엔진 RC엔진 비행기엔진

공급사 바로가기
다음 제품 보기 이전상품
기본 정보
판매가 3,300,000원
국내·해외배송 국내배송
배송방법 택배
배송비 3,000원 (300,000원 이상 구매 시 무료)
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
옵션 선택

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
JRX 100P 소형제트엔진 가스터빈엔진 항공기엔진 RC엔진 비행기엔진 수량증가 수량감소 3300000 (  )
총 상품금액(수량) : 0 (0개)
바로구매하기예약주문
장바구니 담기 SOLD OUT 관심상품등록

이벤트

이 상품을 구매하신 분들은 아래상품도 함께 구매하셨습니다.

상품상세정보

* 본 상품은 해외배송 제품으로 2주정도 소요됩니다.



The new generation of JetCat-RX turbines further reduces the effort for cabling and tubing. The new JetCat RX turbines feature the new ECU V10.0 equipped with the fully digital "bus system". All valves are completely integrated under the turbine housing. Therefore only one hose connection from the pump to the turbine is necessary! The electrical connection of the turbine to the ECU is made via a single PowerBus connection cable. The 29g light ECU V10.0, which is 2/3 smaller than the previous version, only needs to be connected to the fuel pump in addition to the supply battery and the connection to the receiver (1-2 channels). All expansion options known from the ECU V6.0 such as GSU connection, GPS and Airspeed sensor inputs as well as smoker output are still available. The included 3S/2100mAh LiFePO4 battery serves as power supply. This not only supplies the ECU and fuel pump, but also all optional components that can be connected to the bus system, such as another pump for smoke and/or LCU (lighting control). If a further bus pump is used, it can be configured as a smoker pump, the setting of the smoker pump output is then carried out directly via the ECU/GSU. Alternatively, the ECU V10.0 can also be set for operation with a 2S Lipo or 6-8 cell NiCad battery. The ECU V10.0 has an integrated precision air pressure and temperature sensor which intelligently adapts the turbine control to the current environmental conditions. The adjustment of the pump starting voltage is also not necessary. The RX engines all start directly on kerosene. The temperature sensor is internally installed on the turbine side, but can still be easily replaced if necessary.

  • JetCat Autostart
  • Internal kerosene start and temperature sensor
  • Miniature JetCat ECU V10. New fully digitized bus system for minimal cabling.
  • Connection of turbine to ECU with only one plug connection!
  • ECU with Auto-Power down function. ECU switches off automatically after cooling down process (RC system can be switched off, ECU remains ON until cooling down process is finished).
  • ID chip on the turbine side for convenient JetCat compatibility.
  • New, specially adapted smaller accessory components such as miniature ECUs, valves, micro fuel pumps.
  • Operation via 3s LiFePo4 battery. (not included)
  • Low fuel consumption.
  • Fast acceleration
  • CFD-optimized, 5-axis milled micro compressor.
  • Proven, very fast JetCat kerosene start.
  • Internal bearing lubrication with 5% oil content.
  • Supplied with all accessories for installation and operation (without battery).
  • Made in Germany
  • 36 months warranty


NameValue
Pressure ratio2.9
Mass flow0.23
Consumption Full load390
Consumption idle80
Weight [g]1080
Dimensions of the diameter97
Length241
Weight carton
Dimensions of carton
Exhaust gas temperature480-720
Idle speed (1/min)44000
Max rpm (1/min)154000
Thrust at idle (N)2
Thrust @ maxRpm (N)100
Exhaust gas velocity (km/h)1565
Exhaust gas power output (kW)21.7
SFC @ maxRpm (kg/Nh)0.187


상품사용후기

상품의 사용후기를 적어주세요.

게시물이 없습니다

상품후기쓰기 모두 보기

상품 Q&A

상품에 대해 궁금한 점을 해결해 드립니다.

게시물이 없습니다

상품문의하기 모두 보기

상품결제정보




배송정보

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 3,000원
  • 배송 기간 : 2일 ~ 7일
  • 배송 안내 :


서비스문의

교환 및 반품정보